T-WALL BUNK SILO WALL

Featuring a single component design for fast installation and completion. The sections bolt together and sealant is placed in the tongue and groove to create a sealed wall surface. Customer may select any width or length in 5' increments.

  • 8' 6" tall
  • 5' long
  • 5' wide
  • Tongue and groove design
  • Fully reinforced with grade 60 rebar
  • 5000 PSI concrete with fiber
  • 5000 lbs. Per section

T-WALL DIVIDER PANEL

Featuring a single component design for fast installation and completion.

  • 6' tall
  • 8' long
  • 32" wide base
  • Tongue and groove design
  • Fully reinforced with grade 60 rebar
  • 5000 PSI concrete with fiber
  • 5000 lbs. Per section

 

CATTLEGUARD

  • Easy to install: Install directly on the ground or conventionally over a pit
  • Easy to keep clean: Each section can be removed to clean underneath.
  • Dimensions per section:
    • 12" deep
    • 16' long
    • 24" wide
  • Fully reinforced with grade 60 rebar
  • 5000 PSI concrete with fiber
  • 2500 lbs. Per section

Fenceline Feedbunks

  •  

 
  • 8' Length Standard
  • 16" or 22" Front - 30" Back - 36" Wide
  • 3.5 cu. Ft. of feed per foot of bunk
  • 2400 lbs. Per section
  • 2 centered 5/8 threaded bolt inserts
  • 5000 PSI concrete with fiber
  • 3/8 grade 60 steel rebar reinforcing
  • Right or Left ends available.

Custom Lengths Available

H-Bunks

  • 8' Long
  • 5' Wide
  • 26" High - 10" Deep trough
  • 5000 PSI concrete with fiber
  • 4000 lbs. Per section
  • Fully reinforced
  • 3 centered bolt holes
  • End plates available.

Other Products Available:

  • Cattle Slats

 

Slotted Livestock Floor

Single slats-T design Lengths: 4' thru 10' Custom lengths available Widths: 5" thru 8"

6000 PSI test concrete with fiber Hand troweled finish with rounded top edges, Grade 60 steel rebar top and bottom.

These slats are designed to carry live loads. We recommend the use of a quality concrete sealant. Care should be taken during handling and installation so as to not cause any damage to the product.

STANDARD SLAT SIZES
Length  Width  Depth  Weight Sq. Ft. Per pc.
10' 8" 5" 300lbs. 7.5
10' 6" 5" 250lbs. 5.83
8' 8" 4" 200lbs. 6
8' 6" 4" 175lbs. 4.67
6' 8" 4" 135lbs. 4.5
6' 6" 3.5" 110lbs. 3.5
5' 5" 3.5" 75lbs. 2.5
4' 5" 3.5" 60lbs. 2

Support Beams For Slats

Lengths: to 10' 
Dimensions: 8" X 8"

  • 6000 PSI test concrete with fiber.
  • Grade 60 steel rebar
  • Weight: 70lbs per ft.
  • Custom lengths available

Trough

Lengths: to 6' 
Weight: 60 lbs. per lineal foot

  • 6000 PSI test concrete with fiber.
  • Grade 60 steel rebar

 

Pen Divider

Lengths: to 6'
Height: 38"
Base: 14"
Top: 3"
Weight: 200 lbs. per foot

  • 6000 PSI test concrete with fiber.
  • Grade 60 steel rebar
 

Carey Precast Concrete Company
3436 Twp. Hwy 98
Carey Ohio 43316-9763
(800) 852-3987
(419) 396-7142
Email: careyprecast@yahoo.com

Home | PermEntry® | ScapeWel® | Precast Steps | Septic Tanks
Singulair® Aeration |  Cattle Products | Hog Products | Catch Basins
   Fuel Containment | Custom Products | Contact